C0918 Raspberry Pi CM4 Expansion Card PCI-E to Four-way SATA3.0 Expansion Board 6Gbps High-speed SATA Interface Module Board

Product Description: 

On-board SATA host controller (AHCI) is an AHCI controller with low latency, low cost and low power consumption. There are four SATA 3.0 (i.e. SATA Gen3) ports with upstream PCle Gen3 x1 and downstream cascade port multipliers. It can be used to build high-speed 10 systems, including servers, large-capacity system storage or monitoring platforms.

Features: 

● Support single-channel PCI Express● Support L0s/L1/ L23/L3 four power saving states● Support L1 substate deep power saving mode● Support SRIS, AER and LTR● Support SATALED● Support full speed command queue (NCQ) and AHCI SPEC 1.4● Four SATA3.0 (6Gbps) ports● Supported exchange based on port multiplier command● Support SATA partial/dormant power management status

Package Include: 

1× Module Board

4× SATA Converter Cable

1× Screws Pack