Smart BMS 1A 2A 6A Balance Current 8S 17S 20S 24S JK BMS CAN 60A 80A 100A 150A 200A 600A Lifepo4 Li-Ion Battery Protection Board bluetooth APP
45 In stock
Only %1 left
SKU
bgconf-1936722
As low as
£56.65
Descriotion：
| Overcharge protection: | prevent overcharge and affect battery life |
| Short circuit protection: | automatic protection during abnormal short circuit to prevent damage to the protection board and battery |
| Short circuit protection: | automatic protection during abnormal short circuit to prevent damage to the protection board and battery |
| Over-discharge protection: | prevent the battery from being dead and affect the battery life |
| Over-current protection: | prevent current from exceeding the battery's tolerance, causing battery damage |
| Drop-out protection: | prevent the cable from being dropped or the contact is poor, and the battery loses protection |
| Over-temperature protection: | prevent the battery temperature from becoming too high, causing spontaneous combustion or damag |
| Instructions: | https://github.com/NEEY-electronic/JK/tree/JK-BMS |
| BMS protocol: | https://github.com/syssi/esphome-jk-bms |
| VenusOS driver: | https://github.com/Louisvdw/dbus-serialbattery |
| NOTE: | BMS with current of 600A requires customers to purchase relays by themselves |
>>>LCD Display : Click here to open<<<
NOTE:
①:CANBUS interface (if you need CAN function, buy the JK-xxxxCAN version)
②:RS485 interface(At present, all JK BMS are configured with RS485 function by default, it needs to be implemented through the external support module)
③:LCD interface(Please check whether BMS has LCD interface before purchasing. If there is no interface, LCD cannot be used)
④:Heat Function interface(At present, the heating function customized by customers can be accepted, MOQ50pcs)
⑤:Temperature sensor
These ①②③④ interfaces are on the BMS board.
However, ①④ has no actual function, which requires additional customization.
②③ There is no need to customize the BMS, just add an LCD module or an RS485 plug-in module.
①CAN function: YES, buy the JK-xxxxCAN version.
②RS485 function: buy another RS485 plug-in module and plug it into the GPS interface to use it.
③LCD function: buy another LCD module and plug it into the LCD interface to use it.
④Heating function: customized, and also need to purchase the matching CAN heating protocol charger. The charger can communicate with the BMS, and the charger must have a heating function. (Before placing an order, consult and customize in advance)
Note: ②The GPS function requires the support of the local operator. Some regions or countries may not support it. Before placing an order, you need to communicate with us to confirm! ! !
Package Included:
1 x JK Smart BMS
| SKU | bgconf-1936722 |
|---|
Write Your Own Review
